27 replies to this topic

[Steveleece]

Hi

I am after a 998 cooper 12G295 head in original condition if possible, although anything considered and must be willing to post.

Also after a remote box for a 998 cooper preferably 22G68 3 synchro box, but any other remote mini box considered and must be willing to courier or located north west uk.

Thank you for your help.

Steve

[hazpalmer14]

I've got a Slark 12G202 if it's any use

[hazpalmer14]

I've got a Slark 12G202 if it's any use

[Steveleece]

Hi Haz

Thanks for getting back to me, I'm really after a 12G295 because I'm restoring a mk1 1966 cooper and want if I can to have the right spec.

Thanks

Steve

[paul50]

How much is the slack head

I've got a Slark 12G202 if it's any use

[hazpalmer14]

How much is the slack head

I've got a Slark 12G202 if it's any use

£300ONO not been run. Has double valve springs etc

[Mrpeanut]

I have a bare 295 head, not original though as skimmed 65 thou from original 2.750 inches. Was skimmed to suit a 998 with flat top pistons. It's crack free and very clean. PM me if it's of potential interest.

Edited by Mrpeanut, 24 October 2017 - 07:28 PM.

[Steveleece]

Hi, thank you for your response and sorry for the delay.

The block is still the standard high compression block with d top pistons so not sure if this head can be used?

[MiniLuke]

Pretty sure I’ve got a bare unskimmed 12G295 under the bench. I’ll dig out and let you know in the next few days what condition it’s in.

[Steveleece]

Hi Luke

 

Thank you for your reply, that would be great if you would.

 

Cheers

 

Steve

[Mrpeanut]

Hi, thank you for your response and sorry for the delay.

The block is still the standard high compression block with d top pistons so not sure if this head can be used?

This would give you too much compression sadly.

[Steveleece]

Ok well thank you Mr Peanut for getting back to me, I thought that was likely to be the case.

 

Hopefully Luke will be able to dig out his in the next few days.

[geoff-d]

there is a metro turbo head on ebay atm

[Steveleece]

Hi Geoff

Thanks for the reply but Id of thought that a metro turbo head would be a low compression 12G940 so unfortunately not what I am after.

Thanks for letting me know

Steve

[MiniLuke]

https://flic.kr/p/FRhZot
https://flic.kr/p/FRhXBT
https://flic.kr/p/YHbAko
https://flic.kr/p/YHbzGj
https://flic.kr/p/ZMSke6
https://flic.kr/p/ZMSj2B
https://flic.kr/p/ZMShXn
https://flic.kr/p/ZMSgEn