3 replies to this topic

[Mk1cooper]

I cant seem to find a photo of a Works rally car using the Lucas 5-pin socket and plug except on cars with the 4 in a row SFT 700 lamps. Did they use this on a different lamp configuration like AJB44B or CRX89Bs rally lamp setup?

I just bought the socket and now looking for the plug/ wire for it for my rally replica car.

Attached Files

•  B951D65D-3946-4F67-B6AB-2F0604BCF3C6.jpeg   35.1K   4 downloads

Edited by Mk1cooper, 01 February 2018 - 03:00 AM.

[minimans]

I believe that it's a Land Rover part for the Series one, I tried to find one for a restoration job and could not find one anywhere. I hope you have better luck!

[ace01]

That plug was only used when the lamps were on a bar.  It enabled the bar to be removed for servicing or if the lamps were not required. 

 

CRX89B and various others had the lamps fixed to the bodywork in a number of positions and the lamps were then hard wired into the loom.

[Mk1cooper]

That is a really good info there thanks!