3 replies to this topic

[Kieranlee999]

After the crash and the restoration i bought some cheap and chearful front indicators from a show after taking them out for my respray in January the bulbs no won't stay in. I've wedged them in but i was just wondering if anyone had a good remake where this won't happen after all my original ones were 20 odd years old and this didn't happen.

[ukcooper]

put led units on mine.and a led compatible relay so i did not have bugger about with RESISTORS FOR LED LAMPS come in yellow or whit

http://www.minispare...c/led.aspx|Back to search

need two of them as well if pre 1988http://www.minispare...89LED.aspx|Back to

3 pin relay i think it needs ya have read up on them been a while https://www.ebay.co....xkAAOSwYSRZi~Hw

Edited by ukcooper, 01 April 2018 - 09:32 PM.

[cal844]

Buy new units, they won't be expensive

[gazza82]

Tried different bulbs? I had some from halfrauds that wouldn't stay in ... bought some different ones (Bosch?) and they were fine. The cheap ones had very short locating pins and fell out at the first bump or pothole!