Edited by Maxmini, 14 October 2006 - 09:39 PM.
Fitting seats
Started by
Maxmini
, Oct 14 2006 09:33 PM
3 replies to this topic
#1
Posted 14 October 2006 - 09:33 PM
Has anyone got any pictures to show how they fitted recaro seats in their mini i.e how they made their brackets etc. The seats I am using are out of a Rover 800 turbo any pics or drawings welcome.
#2
Posted 15 October 2006 - 12:00 AM
just welded a piece of flat bar across the runners, drilled 2 holes to pick up on the original mounts in the crossmember and a piece of angle across the back bolted through the floor.
thats how i did my GTE recaro's but my mates fiesta recaros had different subframes on em.
Edited by bud666, 15 October 2006 - 12:01 AM.
#3
Posted 15 October 2006 - 09:44 AM
Nice one thanks my seats only very alittle from yours .I will have to do the same but with a few mods.
#4
Posted 15 October 2006 - 09:48 AM
On my fiesta SI seats
I got a L shaped braket at the front to the original hole in the cross member and a piece of wood across of back floor, which i am gunna bolt down.
I got a L shaped braket at the front to the original hole in the cross member and a piece of wood across of back floor, which i am gunna bolt down.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users