3 replies to this topic

[shish_happens]

Hi all, just discovered this crack in the inner wing after getting it back from paint. So removing the whole front again and replacing the inner wing isn't really an option. So what do I do? My mate had a welder so I could give it a go myself or is a new panel a must? Thanks

Attached Files

•  IMG_20200118_160256__01.jpg   62.88K   18 downloads

Edited by shish_happens, 18 January 2020 - 04:18 PM.

[Tupers]

Welding it back together is fine as long as you’re a competent welder.


You should be replacing your rubber front subframe mounts while you at it as this sort of cracking only really happens when the mounts are shot.

[KTS]

if that's the shock absorber i can see between the subframe tower and the inner wing, then it would appear you're missing a section of the inner wing ?

[shish_happens]

if that's the shock absorber i can see between the subframe tower and the inner wing, then it would appear you're missing a section of the inner wing ?

That's the shock you can see yeah. I'll have another look at is