8 replies to this topic

[cristiano1968]

hi ,i think my engine has liners in the bore.

just took head of 

since im rebulding is it ok to rebore the liners to + 20 for new pistons?

or do i have to get new liners insalled?

thanks

[DeadSquare]

Have the bores examined by an engineering workshop.

[Spider]

Some of the factory fitted liners will go to +0.020 but as Deadsquare suggests, let the machine shop have a look and provide advice.

[cristiano1968]

Yes I intend to.
Just wanted some of your opinions
And advice

[nicklouse]

often when you take the head off it does look like liners have been fitted. but it is just looks.

[cristiano1968]

Yep sure does anyway I'll find out when I take the pistons out and crankshaft etc

[bpirie1000]

Maybe best adding some pictures..

[Rorf]

The only way to see if it has liners is to look from the crankshaft side of the block.

[cristiano1968]

Yea when I get everything out I'll do some pictures ?