Jump to content


Photo
- - - - -

Gauge Problems


  • Please log in to reply
No replies to this topic

#1 Pauljb

Pauljb

    Mini Mad

  • Just Joined
  • PipPipPipPip
  • 109 posts
  • Location: Preston

Posted 03 March 2020 - 06:28 PM

Hi folks...
So I've finally got my 1984 mini city e (1275 engine in him) out of the garage this week. Went to blow off some cobwebs to find some problems...with my speedo/dash. All the lights work and the temp gauge only. Found a broken wire on my rev counter which I fixed but that still doesn't work. Plus I'm not sure which wire plugged in the back of it, the spade terminal with either 2 green wires or a white wire, and the speedo needle has no movement on it. The speedo cable spins as I took it out and drove down my road. The fuel gauge didn't work properly before (only read anything above half a tank) so that's a job for later. My main concern is the rev and speedo counters.
Any ideas as to what thre problems might be??
Thanks in advance.
Paul




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users