3 replies to this topic

[jonsharman]

Afternoon All,

 

Rather stupidly I did not take / have lost / maybe deleted the vital pictures from the take-down of my '89 MINI that showed me how the throttle and choke cables are setup!   

 

I've got the abutment plate and can see where the cables go through (I assume there is a a clip for the choke cable to hold it into place) but then how they go I am a little stumped.  I've looked in the Haynes but the drawing I have is not very detailed so does anyone have a picture or diagram?  It's a 1.5" HS4 on a 998 all standard.

 

I've got the various clips, split pins etc. ready to go - could just do with looking at the 'how' to make sure what I think might be right is, in fact, right. 

 

Thanks!

[Its a min]

There are a couple of photos in this thread which show the connections.

 

http://www.theminifo...-what-998-carb/

 

 

Depending on year/type of abutment plate you have, the choke cable may be held on with this clip - 

 

http://www.minispare...px|Back to shop

 

 

Hope this helps.

Edited by Its a min, 27 March 2020 - 10:52 PM.

[jonsharman]

Super - thanks very much and did the trick! Got her running this morning so now onto fine tuning as running lumpy.

[Its a min]

Glad it was helpful.Good luck with tuning.