4 replies to this topic

[1314cc]

So new clutch fitted.I haven't road tested yet as the mini is not taxed. All gears feel fine but when the clutch pedal is pressed all gears can feel a bit notchy. It will go into each gear though.
I haven't bled the slave cylinder since fitting the new clutch , waiting for my daughter to assist me!
Any thoughts...?

[nicklouse]

why do you need to bleed the clutch?

 

what clutch? exactly the same as the old one? you have rested the appropriate settings?

[1314cc]

verto clutch. Just thought to bleed it to rule out air in the system.
It's a brand new clutch kit.
When the engine is running and clutch is pressed the gear changes sometimes feel notchy.With ignition off the gears feel fine

[nicklouse]

If it worked before then you have no reason to bleed it as you have not opened it.

Set the stop nuts to 6.5mm?

Edited by nicklouse, 25 April 2020 - 01:03 PM.

[1314cc]

yes I've set the stop at 6.5mm
Probably need to properly test drive it first?