4 replies to this topic

[andyboy!!]

Hi guys

I’ve fitted the brackets for the spot lamps to the front - four in total. As far as I can remember they are off a sports pack mini.

I don’t have the original bolts. I’ve found bolts that fit but once secure, the actual lamps are still very loose. I know they should move stiffly but these are flopping around like a salmon. They have integrated nuts. Any ideas? Picture attached.



Thanks
Andy

Attached Files

•  72FF21CB-C066-4C5D-A0B6-DFA9A6CCF3A7.jpeg   69.51K   5 downloads
•  EBD43096-3060-447C-A493-528CA98A56A1.jpeg   44.39K   0 downloads

[RustyAutoCityE]

Could you try packing them with a few washers to tighten them up?

[KTS]

If the bracket isn't clamping the light tight enough you could try using a washer to pack it out

[Lord Oversill]

Not 100%, but pretty sure some spot lights have a tubular spacer inside the clamp which the bolt passes through.
So you can tighten without crushing/ bending the light fitting? 
I have some lights which seemed to need excessive tightening before becoming “fixed”

[andyboy!!]

All sorted now thanks for the help