2 replies to this topic

[clubmanjon]

Afternoon all, 

 

I have a standard turbo oil feed which I wanted to replace with a new braided pipe. 

 

I bought this:- https://www.ebay.co....KsAAOSwoN5cQeDR

 

When inspecting new vs old(original spec) the internal diameter is significantly smaller on the new braided line. I have requested the seller confirms the ID of the new pipe. 

 

See the attached photograph. 

 

Do you think the new supply is fit for purpose? 

 

Thanks in advance. 

Attached Files

•  20200718_134831 - Copy.jpg   47.42K   0 downloads

[Turbo Phil]

AN-4 is what you need, looks like it’s probably fine.

Phil.

[clubmanjon]

Thanks Phil will check.

Much appreciated ?