Jump to content


Photo

Vintage Roof Rack Diy


  • Please log in to reply
27 replies to this topic

#16 dasupersprint

dasupersprint

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 848 posts

Posted 04 November 2020 - 06:25 PM

I added a 3rd flat bar in the middle, and 12 more holes and bolts... So now the wood bars are really solid.

 

xhWnYUO.jpg

 



#17 dasupersprint

dasupersprint

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 848 posts

Posted 04 November 2020 - 06:27 PM

But the rear flat bar was still not as solid as I wanted it. So I made my own curved angle bar by welding a 90 degrees section on it. Now it's more than solid.

 

wEfqiBZ.jpg

e828fT1.jpg

 



#18 dasupersprint

dasupersprint

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 848 posts

Posted 04 November 2020 - 06:28 PM

And reinforcing plates on both sides. I should stop adding weight on it now

 

hd3YyoS.jpg

 



#19 dasupersprint

dasupersprint

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 848 posts

Posted 10 December 2020 - 07:04 PM

I'm not done! still adding reinforcement on the front

 

ja5J43s.jpg

 



#20 Gilles1000

Gilles1000

    Speeding Along Now

  • TMF+ Member
  • PipPipPipPipPip
  • 438 posts
  • Location: Karlsruhe

Posted 10 December 2020 - 07:18 PM

Nice work!

And hats off for doing that outside in the snow!! 



#21 dasupersprint

dasupersprint

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 848 posts

Posted 18 January 2021 - 02:17 PM

The wood bars are sanded and with 7 layers of varnish

 

pJPaBJN.jpg

 



#22 dasupersprint

dasupersprint

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 848 posts

Posted 18 January 2021 - 02:20 PM

I cleaned the welds and it looks ready for finishing. I have 3 choices for the finish:

- Chrome or zinc plating. If too expensive I will go for:

- Powdercoating in the most mirror-like finish. If too expensive I would:

- Paint it myself with rattle cans

 

qlVLCnw.jpg

 

IDS8U2f.jpg


Edited by dasupersprint, 18 January 2021 - 02:20 PM.


#23 dasupersprint

dasupersprint

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 848 posts

Posted 18 January 2021 - 02:23 PM

I will see in spring time because for now, everything is closed for Covid. I can't paint outside because it's too cold and can't paint inside because the Mini is there.

Meanwhile I put the rack back on the roof and it saves me some space in the garage

 

Znyeg6O.jpg


Edited by dasupersprint, 18 January 2021 - 02:45 PM.


#24 dasupersprint

dasupersprint

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 848 posts

Posted 17 May 2021 - 01:03 PM

For the finish I'm going for the cheaper route with spray cans, as money is better spent elsewhere. I bought a can of ''chrome'' paint, knowing that it will be bright metallic, not chrome obviously.

 

That allowed me to fill the imperfections with filler before the final primer coat

 

xybzGHr.jpg

BWgtg92.jpg

 



#25 dasupersprint

dasupersprint

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 848 posts

Posted 17 May 2021 - 01:04 PM

Final primer

 

j2IeuaG.jpg

 



#26 I hate Brian

I hate Brian

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 770 posts
  • Location: nottingham

Posted 18 May 2021 - 05:35 PM

Great work looking forward to the final finish



#27 dasupersprint

dasupersprint

    One Carb Or Two?

  • Members
  • PipPipPipPipPipPipPip
  • 848 posts

Posted 28 May 2021 - 12:26 PM

So here is the final thing! The ''chrome'' paint looked nice but when I ran my finger on it my finger became silver! I didn't want to take chances so I put a clear coat over it. It became more silver and less metallic but it appears solid.

 

m75C0Wy.jpg

KprJwL6.jpg

bDGk1fE.jpg

 



#28 sonscar

sonscar

    Up Into Fourth

  • Members
  • PipPipPipPipPipPipPipPipPip
  • 2,720 posts
  • Location: crowle
  • Local Club: none

Posted 28 May 2021 - 12:32 PM

Looks good and wow,your roof sure is shiny,Steve..




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users