9 replies to this topic

[Maccmike8]

Going to make my own bottle now Ive lost the space to fit the remote brake servo.

 

Will have an external pump.

 

Needs to be small <500ml but not thin and long.

 

Currently thinking small kids stainless steel drinking bottle.

 

Any ideas?

 

[smurfomatic]

Depending on the space available, maybe a reusable coffee cup? Or even a jam jar?

[Maccmike8]

Good shout, hadnt thought about the cup.

[beardylondon]

How about a Tropicana bottle, with a hole drilled in the cap, they are made of very thick plastic.

[cal844]

Any thick plastic bottle would do, or send some drawings to an alloy welding specialist

[TheFabMini]

I’ve seen this sort of thing done at a few VW shows before, along with red bull cans over ignition coils. A WKD blue with some blue washer fluid is a bit Jeremy Kyle but could look quirky

 DD9949DC-F72D-402B-896A-15FC40E3419E.jpeg   78.8K   1 downloads

[GT Jimmy]

I like the Jack Daniels idea, might be an issue if it freezes

[cal844]

I like the Jack Daniels idea, might be an issue if it freezes

Buy a decent screenwash that goes to a low temperature

[MiniCarJack]

On a similar note, does anyone know the diameter of the standard early tudor washer bottle? https://www.minispar...sic/GWW918.aspx

 

Mine is completely missing so don't have it for reference, but I quite like the idea of finding something quirky like an old rum or whiskey bottle that's the same/similar diameter, so it could fit into the original mounting 

[Tones61]

Mines in behind the race dash 🚘👍

Attached Files

•  IMG_1750.JPG   35.97K   1 downloads