does anyone know what the thread size for the front caliper to hub bolts (8.4" discs)?
brake caliper bolt thread size?
Started by
maph2
, Nov 06 2006 04:17 PM
3 replies to this topic
#1
maph2
-
- Members
-
- 1,291 posts
One Carb Or Two?
- Location: Warwick
- Local Club: Poor Boys Warwick
Posted 06 November 2006 - 04:17 PM
#2
maph2
-
- Members
-
- 1,291 posts
One Carb Or Two?
- Location: Warwick
- Local Club: Poor Boys Warwick
Posted 06 November 2006 - 04:37 PM
found this on minispares:-
3/8" high tensile Bolt but 3/16" longer at 1.5" long for use on our 7.5" 4 pot alloy calipers or any other usage when longer bolts are required for mounting the calipers to the hubs. The ERA turbo used Metro 4 pot calipers and used special nylon coated safety locking bolts ERA1128
guess its 3/8" then and 1.5" long
3/8" high tensile Bolt but 3/16" longer at 1.5" long for use on our 7.5" 4 pot alloy calipers or any other usage when longer bolts are required for mounting the calipers to the hubs. The ERA turbo used Metro 4 pot calipers and used special nylon coated safety locking bolts ERA1128
guess its 3/8" then and 1.5" long
#3
miniboo
-
- Members
-
- 9,327 posts
Lord of Original Thinking
Posted 06 November 2006 - 05:33 PM
sounds about right
#4
maph2
-
- Members
-
- 1,291 posts
One Carb Or Two?
- Location: Warwick
- Local Club: Poor Boys Warwick
Posted 07 November 2006 - 02:36 PM
yep - is 3/8". went to a local fastenings supplier and got 4 suitable bolts for £1 all in - better than paying £3.52 (era turbo ones) each from minispares
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
