Anyone got any advice for removing the rear bulkhead? Mine needs changing. Thanks
Rear Bulkhead
Started by
Bees1957
, Sep 19 2021 09:41 PM
4 replies to this topic
#1
Posted 19 September 2021 - 09:41 PM
#2
Posted 19 September 2021 - 09:45 PM
Brace and then drill out the spot welds.
#3
Posted 20 September 2021 - 12:04 AM
Brace and then drill out the spot welds.
This plus depending on the age of the car there will be the rear seat belt anchor points which are not spot welded.
#4
Posted 20 September 2021 - 02:28 PM
If it is truly in need of replacement I would use a saw to cut it away as close as possible to its seams and then attack the rest with drills and suitable chisels.Bracing is a given,Steve..
#5
Posted 21 September 2021 - 06:25 PM
I fitted a brace across doors and cross braced to each side when removing floor and didn’t do any additional bracing when removing rear bulkhead, I measured everything and it didn’t move.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users