14 replies to this topic

[CDY]

Hi. Has anyone got 16 of these they could let me buy. Unfortunately when I changed the wheels the tyre fitters through mine away.

 They are the ones for 12” steel wheels with the silver/black trims and the ones that the black wheel nut covers (GAW116) fit.

would appreciate any help, thanks.

[GT Jimmy]

I have a few lying around, I think 11, 7 or 8 of them with the covers and collars I may never use. If you find another half set I'll get them out

[GraemeC]

I’ve a selection of nuts - can you post a picture?

[CDY]

Thanks both GT Jimmy and GraemeC.

 

I copy a photo of the FAM3721 as well as attaching a better photo.

 

they are for 12” Steel wheels and I already have the caps for them.

 

I think they did a later model where the split washer is combined with the nut.

 

If you could let me know if you have a set and how much you want (either by private message on messenger or on here), that would be appreciated.

 

Thanks.

 

 

 ABE4CA93-60E9-4C4F-BB3F-4DC6E2ECD12D.jpeg   13.24K   3 downloads

 

[CDY]

Sorry, it wouldn’t let me attach the photo but I think it shows in the post.

[nicklouse]

I have one or two somewhere. If you need to make up a set.

[CDY]

I have one or two somewhere. If you need to make up a set.

HI nicklouse

if you could let me know how many you have, if they have the split washer and how much you want including postage to Kent, that would be appreciated.

Again you can pm me on messenger if you like.

Thanks.

[GraemeC]

I’m sure I have some - I will look tomorrow.

[GT Jimmy]

I have 10 nuts. 9 with collars and 6 caps

 

[GraemeC]

I have 8 and have realised there are two slightly different versions.
The ones as in GT Jimmy’s post above that are flat across the head (I have one of these), or the ones in the picture below that have a raised section on the head (I have 7 of these).

The flat head are a taper seat whereas the others are a dome seat. So it will depend on your wheels as to which you need, but you said 12” so I think you’ll need the taper ones.

 

 

 

 

Edited by GraemeC, 27 December 2021 - 12:41 PM.

[CDY]

Hi GT Jimmy

i would be interested in the 10x nuts and the 9x collars. Not too worried about the caps as I already have them.

 

Any chance you could tel me what you are after, including postage? You can message me on 07885351443.

Many thanks.

Julian

[CDY]

Hi GraemeC

 

i think it is the flat headed one with the tapered seat that I am after.

 

i would be interested in the 1x nut that you have.

 

Could you tell me what you are after, including postage? You can contact/message me on 07885351443.

Many thanks.

Julian

[CDY]

 

I have one or two somewhere. If you need to make up a set.

HI nicklouse

if you could let me know how many you have, if they have the split washer and how much you want including postage to Kent, that would be appreciated.

Again you can pm me on messenger if you like.

Thanks.

 

Hi Nicklouse

did you manage to find any of these nuts as I am still after a few.

Some people on this forum have located some but I will still be short of 5 or 6.

If you can help, that would be great.

Thanks, Julian

[GraemeC]

PM me your address and I'll get it in the post.

[nicklouse]

Only one with the taper seat one.