5 replies to this topic

[KobukKobuk]

Hi~

This is a question about the spi late type ignition coil pack.

The connector plugged into the coil pack has 4 terminals, but there are only 3 wires and 3 terminals.

Isn't that the original 4?

Thank you~

 

Attached Files

•  KakaoTalk_20220111_010928905_02.jpg   36.62K   3 downloads

Edited by KobukKobuk, 10 January 2022 - 11:00 PM.

[nicklouse]

Nope just 3. Have a look at the wiring diagram in your Haynes manual or the redrawn diagrams above.

[Spider]

I've moved this thread to the SPi / MPi section.

[KobukKobuk]

Nope just 3. Have a look at the wiring diagram in your Haynes manual or the redrawn diagrams above.

Then the connector is normal, right?

I'll check Haynes manual. Thanks for the advice.

[Steve220]

Nope just 3. Have a look at the wiring diagram in your Haynes manual or the redrawn diagrams above.

Then the connector is normal, right?
I'll check Haynes manual. Thanks for the advice.

Yes. A 12v and 2 grd triggers.

[KobukKobuk]

 

 

Nope just 3. Have a look at the wiring diagram in your Haynes manual or the redrawn diagrams above.

Then the connector is normal, right?
I'll check Haynes manual. Thanks for the advice.

Yes. A 12v and 2 grd triggers.

 

 

Question has been resolved. thank you.