What is the clearance for the r/h diff. Cover bearing? I read somewhere 1 to 2 thou. Can someone confirm? Also what is the proper location of the oil whole in the bearing? Old one is at about 1/2 o’clock position.
Differential Side Cover
Started by
Zami
, Feb 15 2022 02:22 PM
6 replies to this topic
#2
nicklouse
-
- Members
-
- 18,585 posts
Moved Into The Garage
- Location: Not Yorkshire
- Local Club: Anonyme Miniholiker
Posted 15 February 2022 - 02:27 PM
Thrust bearings or not?
#3
Zami
-
- TMF+ Member
-
- 161 posts
Mini Mad
- Location: Southport, NC
Posted 15 February 2022 - 02:53 PM
Diff. Side cover bushing 2A3538
#5
Spider
-
- Admin
-
- 14,860 posts
Moved Into The Garage
- Location: NSW
- Local Club: South Australian Moke Club
Posted 15 February 2022 - 06:08 PM
I line up the hole in the bush with one of the slots in the cover. For these, they are low speed and moderate load. I ream them to 0.001" and they soon settle at around 0.0012" to 0.0015" after running for a short while.
#6
Zami
-
- TMF+ Member
-
- 161 posts
Mini Mad
- Location: Southport, NC
Posted 15 February 2022 - 06:09 PM
Thks spider
#7
alex-95
-
- Members
-
- 6,025 posts
I am THE CLAMP MAKER
- Location: l
Posted 15 February 2022 - 07:15 PM
As Spider says 1 thou clearance, I bore mine out on a lathe.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
