Edited by gazza82, 18 May 2022 - 09:03 AM.
Help With Engine Identification
Started by
1985classicmini
, Apr 13 2022 06:53 PM
17 replies to this topic
#16
gazza82
-
- Members
-
- 2,917 posts
Up Into Fourth
- Location: Bucks
- Local Club: TMF+
Posted 18 May 2022 - 09:03 AM
Bin the ball-bearing pressure relief valve ... stick with the standard one will be the advice on this forum
#17
cal844
-
- Members
-
- 9,488 posts
Crazy About Mini's
- Location: Ballingry, Fife
- Local Club: TFMOC
Posted 18 May 2022 - 12:48 PM
Bin the ball-bearing pressure relief valve ... stick with the standard one will be the advice on this forum
I agree
#18
1985classicmini
-
- Just Joined
-
- 21 posts
Learner Driver
- Location: Oxfordshire
Posted 18 May 2022 - 05:43 PM
Bin the ball-bearing pressure relief valve ... stick with the standard one will be the advice on this forum
I agree
Thank you both, it’s gone from the list, I’m listening to any other changes or additions that are recommended, read quite a few forums and a reoccurring compression ratio seems to be 10,1, anyone built a fast road engine with a different cr and found it successful?
the cam I have is the standard 1275 with (Intake): 0.263" (Exhaust): 0.263" so looking for something with a little more lift if anyone car recommend anything they have liked
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
