2 replies to this topic

[Mudhen]

I recently purchased an old rallycar with a Weber carb on it....was trying to set the float but ran into an issue.  The top cover says it's a 45DCOE Series 13 - the Haynes Weber book doesn't list any spec for that.  Also, if I measure the throat of the carb it measures 48mm - so is it really a 48DCOE?  The book doesn't list a single 48 spec...

 

Thanks,

 

Pat

[r.tec]

http://www.baukasten...ni_cooper_s.pdf

 

[Mudhen]

Thanks!

 

Mine was around 3mm when closed so off by a good bit!

 

Pat