5 replies to this topic

[1314cc]

Anyone know the diameter of the cooper steering wheel badge on the Moto lita steering wheel? I'm guessing around 50mm! I'm getting one made up by car graphics shop

Attached Files

•  Screenshot_20220510-120933_Chrome-min.jpg   15.63K   8 downloads

[brivinci]

I'd imagine you have done it already but yes, 50mm is the O.D. of the red ring that partly makes up the decal.

[71Pickup]

It’s not a decal or the original ones are not a decal they are a chrome badge insert and you see them on eBay quite often

[RichMPiBlue]

If you're fitting it to a mpi give up now lol. I've just been through that loop of fire, universal bosses do not fit due to the spine size on the mpis!

[Bobbins]

If you're fitting it to a mpi give up now lol. I've just been through that loop of fire, universal bosses do not fit due to the spine size on the mpis!

But you can get an SPi/MPi specific boss that does work, Wood & Pickett sell them.

[RichMPiBlue]

 

If you're fitting it to a mpi give up now lol. I've just been through that loop of fire, universal bosses do not fit due to the spine size on the mpis!

But you can get an SPi/MPi specific boss that does work, Wood & Pickett sell them.

 

 

True, or go down a cheaper route and not be ripped off. With the help of a member on this board, get one of these and you're away if you have a mpi/want a change. Which I did and was successful. 

 

https://www.ebay.co....tm/180949242131