2 replies to this topic

[The-evil-GT]

Hi all , I’ve got a 79 1275gt and wheels that are about 3 inches to wide so obviously the rub on the front. I’ve got the fibreglass arches but I need to cut the original one back , obviously I’m a little nervous as this is my first time , has anybody got any tips on making a nice clean cut and retaining the lip that runs around the perimeter or the wheel well opening. Thanks in advance

[cal844]

Yes, buy the diagrams that are available on Minispares website for the spirtspack type arches.

[Steve220]

As above. Cut them back then reinforce. The entire original lip goes.