1 reply to this topic

[Pops_Guild]

Hi TMF,

 

I'm Roger (Pops_Guild) and for a while now I've been helping find rare parts for folks. Mostly for SPi's but I can usually have a good stab at helping finding rare and NLA (no longer available) parts for any classic Mini or know folks who can.

 

It all started when I decided to completely restore my Rover Cooper, I discovered the hard way that so many of the important parts just weren't available any more for the SPi Minis and little by little I started to amass some important spare parts.

 

My Cooper is a JDM so some of the parts can only be found in Japan. Having to do that also taught me a lot about the quality and longevity of the re manufactured parts coming out of Japan. A lot of UK sourced rubber based parts I initially used didn't even last until I got my Cooper back on the road.

 

I also worked out how to repair the SPi inlet manifold, my guide about doing that is pinned to the SPi tech/problems area of this forum... 

 

A Guide To Help Refurb Spi Inlet Manifolds - Injection Mini Specific - SPi/MPi - The Mini Forum

 

 

Anyway, I setup a Facebook page to do a few things; provide tech info on SPi's (because there's a lot of duff info out there) and that page also has a storefront where you can browse the rare parts I have in stock. I am also the official UK distributor for Classic Minis Japan. I have a lot of their smaller items in stock to post immediately but can also help with some of their larger items too. These Japanese made items are also in the store.

 

I do this as a sort of hobby, I have a day job too but I will help where I can, as quickly as I can.

 

The Facebook page is here.

 

Classic Mini NLA: Rare & Alternative parts | Facebook

 

If you want something from the store you just message me on FB or you can email me on [email protected]. Or I you can message me here too. Payment is via PayPal or bank transfer. 

 

There's also a YouTube channel. I put helpful info on there from time to time.

 

Classic Mini NLA - YouTube

 

Thanks for reading. Hopefully I'll be able to help some of you out.

 

cheers

Roger

 

 

Attached Files

•  ClassicMiniNLA.jpg   16.4K   0 downloads

[MatthewsDad]

Roger your assistance with replacing my inlet manifold was much appreciated. It was a quality product.

Edited by MatthewsDad, 08 January 2023 - 05:33 PM.