Stu.
Rover Fuel Line Protector Plate …
Started by
Bobbins
, Nov 29 2023 07:23 AM
3 replies to this topic
#1
Bobbins
-
- Members
-
- 1,514 posts
Camshaft & Stage Two Head
- Location: Chester
Posted 29 November 2023 - 07:23 AM
Can anyone help me with what fasteners are needed to secure this plate? It’s the protector over the fuel lines at the toe board and unfortunately I didn’t remove myself. There’s 4 threaded studs on the toe board but the threads are very coarse, the only thing that I can think will fit are the large flange plastic nuts as used on the heat shields further back?
Stu.
Stu.
#2
Stevie W
-
- Members
-
- 1,204 posts
One Carb Or Two?
- Location: Southampton
- Local Club: P&SMOC
Posted 29 November 2023 - 08:48 AM
The large flange plastic nuts according to Minispares are the correct fasteners for this plate, part number is:
EYH10001 PLASTIC NUT FOR FUEL LINE PROTECTOR AND CAT HEATSHIELD
4- off required.
Cheers, Steve.
#3
Bobbins
-
- Members
-
- 1,514 posts
Camshaft & Stage Two Head
- Location: Chester
Posted 29 November 2023 - 09:01 AM
Cheers Steve, that’s a big help.
#4
Stevie W
-
- Members
-
- 1,204 posts
One Carb Or Two?
- Location: Southampton
- Local Club: P&SMOC
Posted 29 November 2023 - 09:12 AM
You're very welcome Bobbins.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
