2 replies to this topic

[Myminiproject]

Hi all,

 

So I got a gasket and seal kit from Mini Spares:

 

https://www.minispar...s/AJM100MS.aspx

 

And trying to figure out which is the oil suction o ring between the engine and the gearbox. The photo shows the old one I'm replacing on the bottom and the two that come with the kit at the top. Top left one is slightly bigger but will just fit in the recess in the gearbox. Any ideas?

 

The other photo shows three identical copper washers that come with the kit, which I'm pretty sure are for the oil sump plug, but why three, I don't know. Question is, what is the other copper washer with the circular cross section?

 

Thanks in advance,

 

MMP

Attached Files

•  IMG_8582.jpeg   35.14K   0 downloads
•  IMG_8581.jpeg   33.29K   0 downloads

[nicklouse]

There is also a rubber O ring on the diff casting.

And copper washers for various plugs and things on the block. Oil transfer pipes and spring retaining caps…

[Myminiproject]

There is also a rubber O ring on the diff casting.

 

 

Thanks nicklouse. The only o ring I can think of on the diff case is the one for the rod change detent, but that one is smaller than the oil suction o ring - hoping I'm not missing an o ring on my diff as I've just rebuilt it!