3 replies to this topic

[CRoger]

Does anybody know the location of the off side indicator wiring junction connector / spltter on a Mk2 1968 Cooper.  The connector ( green & white wires ) feeds the front and rear indicators ?

 

Thanks in advance.

[KTS]

it's a bit of a guess, but have a look at the steering column connector; that would be a convenient place to join the front and rear feeds

[stuart bowes]

at or near the indicator relay plug would be my guess but I could be wrong

 

wait no that's not right is it..

 

from memory (just occurred to me after posting..)

 

generic green switched live through hazard switch (when in 'off' position), into the indicator relay, from there to the stalk which sends it left or right when required

 

so yes it would be from the stalk position onwards somewhere.  there may be more than one split point because it goes to the front and side, and also into the bundle somewhere near the wiper motor which goes to the rear loom

Edited by stuart bowes, 11 March 2024 - 02:50 PM.

[CRoger]

Great shout just found the split connector adjacent to the windscreen wiper motor ( behind the sound proofing ).  Got power to the rear indicator but nothing at the front and looking at the corrosion in the connector I have identified the problem / issue.

Words of advise most appreciated.