3 replies to this topic

[superzorg1000]

Hi All,

 

I recently bought a set of Revolution 10x6 wheels but one of them is different to the other three (I knew this when I bought them).

 

I'm hoping someone may have a wheel that will complete my set (I'm only after one wheel ideally, but will consider all). Condition not too important as I will be refurbishing them anyway.

 

I have included pictures below of the wheel that I require to complete the set (the black one). Revolution 10X6 ET16. Flat pockets for the nut washers.

 

I also included a picture of the offending "incorrect" wheel (gold) for reference. Notice the difference in the flat section of the face profiles, it further extends past the holes (demonstrated by the witness mark from the washers), and the section between the spokes comes to a point. It also has no pockets for the washers to sit in.

 

Any questions, please ask.

 

Thanks in advance.

Matt

 

 20240424_204947.jpg   69.47K   3 downloads

 20240424_204953.jpg   59.87K   2 downloads

 20240424_204823.jpg   92.56K   1 downloads

 20240424_204929.jpg   100.35K   1 downloads

 20240424_204917.jpg   69.73K   2 downloads

 

 

 

 20240424_210101.jpg   65.64K   1 downloads

 

 

 

 

 

 

P.S. A picture of my car for those who are interested on what it will be going on:

 20240424_200923.jpg   81K   3 downloads

 

[Ichbineinmini]

Did minilite do a version of the Revolution?

I’m seeing 10x5 have a +19, 10x6 have a +3

[DeadSquare]

I wish you luck. 

 

My Unipower GT was fitted with Cosmic wheels, and over the years I have been fortunate to acquire the odd additional wheel.

 

Yes, odd

.

4, almost the same but not quite, variants.

[Lucas1988]

The people to contact for odd type wheels is Huddersfield mini, they seem to find and keep them stashed or at least used to. I brought a 10x6 original mamba wheel a good few years ago off them and they had other wheels at the time. I’d give them a bell