12 replies to this topic

[Marky998no2]

Has anyone got a photo of lower lower dash 5 switch plugs wiring connections or what goes where mine differs from manual diagram

[lsto]

I can take some tomorrow afternoon if noone posts before.

[Marky998no2]

Thanks appreciate it

[lsto]

Hi sorry for the delay, I'll be honest I totally forgot. Anyway all terminals are described as if the switches are fitted in the dash and on 2 colour wires the second colour is the trace.
Headlight switch has 2x blue wires to the top terminal, brown to the middle, red to the bottom.
Hazard switch has a green/pink on the top left terminal. Green/white on top right. Green/red on middle left terminal. Dark green/green on middle right which connects to switch illumination. Bottom left is dark green/brown and bottom right is green/brown. Also has a black wire which connects to switch illumination.
Fog light has blue/orange on top. Blue/yellow on bottom. This wire tees off to the switch illumination and there is a black wire to switch illumination.
Heated screen is green/yellow, this tees off to the switch illumination. Bottom wire is green. There is also a black wire to switch illumination.
Brake warning is black/white on top terminal, this also tees off to switch illumination. Bottom wire is black. There is also a purple wire which goes to switch illumination.
I'll try to upload photos but they aren't very good.

[lsto]

Headlamp switch

Attached Files

•  PXL_20260110_164355308.MP~3.jpg   27.23K   1 downloads

[lsto]

Hazard switch

Attached Files

•  PXL_20260110_164425017~2.jpg   26.04K   1 downloads

[lsto]

Fog light

Attached Files

•  PXL_20260110_164431301~3.jpg   28.99K   0 downloads

[lsto]

Heated screen

Attached Files

•  PXL_20260110_164435097~2.jpg   32.7K   0 downloads

[lsto]

Brake switch

Attached Files

•  PXL_20260110_164439805~2.jpg   28.61K   1 downloads

[Marky998no2]

Thanks that helps ones not working as should hazzards work but not iluminated so if guess bulb,, the brake test one was working& it lights up if put 12vt on side pins but not when fitted to loom, wondered it is linked to inline fuse only got 2both are ok

[Marky998no2]

https://ibb.co/N6QVdcDD

[Marky998no2]

https://ibb.co/N6QVdcDD

[lsto]

I think there should be 4 inline fuses if I remember correctly. My hazard switch needs a clean up with contact cleaner from time to time because it doesn't work properly sometimes. Really I probably should replace it but I'm tight lol