15 replies to this topic

[BobbyMax]

Anybody know where i can get these from or what thy are called?

Attached Files

•  20260606_144639.jpg   38.73K   8 downloads

[mab01uk]

Not sure if any of these might have something similar....

 

Vehicle Wiring Products:-

https://www.vehiclew...c88facf88794998

 

12 Volt Planet:-

https://www.12voltpl...connectors.html

 

Polevolt:-

https://polevolt.co....sings-130-c.asp

Edited by mab01uk, 06 June 2026 - 05:25 PM.

[Spider]

You could also try Autosparks as they fit them in to the looms they make.

 

https://www.autosparks.co.uk/

 

[NLinPEN]

Do you only need the metal pins (that are connected to each wire)? Or do you need the black plastic body as well?

[BobbyMax]

Do you only need the metal pins (that are connected to each wire)? Or do you need the black plastic body as well?

Just the pin but would take either

Edited by BobbyMax, 07 June 2026 - 08:48 AM.

[NLinPEN]

 

Do you only need the metal pins (that are connected to each wire)? Or do you need the black plastic body as well?

Just the pin

 

Electronics (online) stores often sell connectors and connector pins. As an example (I'm not affiliated with them): mouser.com/connectors 

It would help your search a lot if you happen to know the make and type number of the actual connector though, as the available variety is huge.

[PoolGuy]

PC-12 connector, not sure where I'd get them in the UK but the yanks seem to use them in a lot of classic stuff https://www.ronfrancis.com/product/344

[cal844]

I'm sure minispares used to sell repair looms for this connector

[smurfomatic]

I'm sure minispares used to sell repair looms for this connector

 

This one?

 

https://www.minispar...edo-repair-loom

[BobbyMax]

Thaks all, got some from the very helpfull guys at autospark.

[BobbyMax]

You could also try Autosparks as they fit them in to the looms they make.

https://www.autosparks.co.uk/

Cheers spider...good call

[cal844]

I'm sure minispares used to sell repair looms for this connector

This one?

https://www.minispar...edo-repair-loom

That's the one 👍 I couldn't get onto minispares site for some reason

[68+86auto]

The minispares one appears that it might be 3d printed and is very expensive.

Edited by 68+86auto, 12 June 2026 - 08:20 AM.

[EdmundP]

I have a spare used one. If ylu are interested i will post a photo tomorrow.

[Midas Mk1]

The reproduction 3d printed ones as on new looms are awful, best of getting an original plug with pigtails to splice in.