Mini Mad
Posted Yesterday, 08:00 PM
Hello
New front loom AN124 arrived yesterday, laid out on floor checking where all wires go.
I've fitted one of these a few years ago, so should go in ok.
But there is this wire, that I do not remember being there on the previous loom.
The red/white one with the odd connector, what connects to this?
20260702_180753.jpg 46.42K
0 downloads
Edited by MiniFanGraham, Yesterday, 08:00 PM.
Moved Into The Garage
Posted Yesterday, 08:10 PM
It actually appears to me to be White / Red, which is to the coil on the Starter Solenoid.
If I am wrong here and it's Red / White, that's Park Lamps - fused.
Mini Mad
Posted Yesterday, 10:24 PM
It actually appears to me to be White / Red, which is to the coil on the Starter Solenoid.
If I am wrong here and it's Red / White, that's Park Lamps - fused.
yes it is White / Red
the rubber grommet in the image is the one that goes inside car under the centre dash console, so seems odd place for a Starter Solenoid wire
One Carb Or Two?
Posted Yesterday, 10:36 PM
It is there as they have a join under the dash for where the automatic selector inhibitor switch connects. When a manual is fitted, the wires are just plugged together.
Edited by 68+86auto, Yesterday, 10:37 PM.
Moved Into The Garage
Posted Yesterday, 11:04 PM
yes it is White / Red
the rubber grommet in the image is the one that goes inside car under the centre dash console, so seems odd place for a Starter Solenoid wire
The Wires to the Ignition Switch, where this one would be headed for, do come down that way. There is in most looms a M and F connector about were you are at to head to the Auto Inhibitor Switch as 68+86 mentioned.
0 members, 1 guests, 0 anonymous users
