Jump to content


Photo
- - - - -

Bilt Hamber Gas Mac Review After 4 Years


  • Please log in to reply
2 replies to this topic

#1 Mito

Mito

    Speeding Along Now

  • TMF+ Member
  • PipPipPipPipPip
  • 460 posts
  • Location: Hull

Posted Yesterday, 10:48 AM

My mini had a new tank as part of its rebuild back in 2022. Since then I've filled up regularly with E10 fuel and used Bilt Hambers Gas Mac after most fill ups.

 

Over 4 years on, I'm removing the tank to address some rust/paint issues on the car and thought I'd take a look in the tank since I'm draining it. 

 

Here are the results...

 

Attached File  1000042043.jpg   18.35K   0 downloads

 

Attached File  1000042044.jpg   14.54K   0 downloads

 

So far, so good. I can't see much, if any, corrosion and that's after years of E10. 

 

The fuel pipes have perished over the 4 years, so I'll have to source some better ones. I'm impressed with gas mac though.



#2 beardylondon

beardylondon

    Camshaft & Stage Two Head

  • TMF+ Member
  • PipPipPipPipPipPipPipPip
  • 1,784 posts
  • Location: Hampshire

Posted Yesterday, 08:46 PM

I have to ask, why not use E5 and protect your fuel pipes?

#3 Mito

Mito

    Speeding Along Now

  • TMF+ Member
  • PipPipPipPipPip
  • 460 posts
  • Location: Hull

Posted Yesterday, 09:12 PM

I have to ask, why not use E5 and protect your fuel pipes?

Aside from the short fuel pipe between the tank and pump, they're all fine. I replaced all fuel lines as part of the rebuild, so there shouldn't be any issues with them. 






2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users