Hi,
My daughter owns and runs a 1994 (L), 1275cc, Rover, Mini Sprite and requires a new downpipe from the exhaust manifold to the CAT.
Unfortunately the part was not available at the fitting shop.
When looking through suppliers websites and catalogues I have noted that instead of the single down pipe (which is fitted) it should be a two into one.
Is the single pipe correct or has in the vehicles past had a change of manifold?
Regards
Graham
Rover, Mini- Sprite
Started by
GrahamL
, Jan 06 2007 01:07 PM
4 replies to this topic
#2
miniboo
-
- Members
-
- 9,327 posts
Lord of Original Thinking
Posted 06 January 2007 - 01:11 PM
is it injection or carb?
#3
GrahamL
-
- Noobies
-
- 2 posts
Starting My Mini Up
Posted 06 January 2007 - 01:58 PM
is it injection or carb?
Hi,
It is a carb
Regards
Graham
#4
Bungle
-
- Members
-
- 28,971 posts
Original Spamster
- Location: Cornwall
- Local Club: cornish mini club
Posted 06 January 2007 - 04:21 PM
i thought at that age they had the metro 2 down pipes set up
it might be cheaper to buy a LCB performance manifold rather than the standard down pipes
it was when a mate needed new down pipes for his spi
it might be cheaper to buy a LCB performance manifold rather than the standard down pipes
it was when a mate needed new down pipes for his spi
#5
taffy1967
-
- Members
-
- 9,896 posts
Whovian
- Local Club: South Wales Minis
Posted 06 January 2007 - 08:58 PM
Yes and I can't recommend Maniflows exhausts and service enough because their excellent and I've had one of their LCB's fitted for the past 10 years and a nice twin-box exhaust system too.
Oh and you could loose the power sapping cat if you wanted, since it's known that if a Mini has a carburretor it doesn't need one fitted for the MOT.
Maniflow Link
Oh and you could loose the power sapping cat if you wanted, since it's known that if a Mini has a carburretor it doesn't need one fitted for the MOT.
Maniflow Link
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
