What parts would I need to get hold of?
The head has already been uprated and should be strong, what other parts do I need? Thanks.
To turbo a 1293
Started by
overboost
, Jan 11 2007 05:15 PM
4 replies to this topic
#1
Posted 11 January 2007 - 05:15 PM
#2
Posted 11 January 2007 - 05:23 PM
by uprated do u mean compression has been lowered?? for a turbo u want nice dished pistons and a big head chamber!!
#3
Posted 11 January 2007 - 06:17 PM
you will need a TURBO!!
look in the turboi section and visit turbo phils website.
look in the turboi section and visit turbo phils website.
#4
Posted 11 January 2007 - 06:30 PM
Depends on the CR of the engine as it is, and how much boost you are going to run. You will prolly need to look at lowering compression ratio for a start. Then you'd need to fit a bulkhead box to give the turbo room. The turbo section of this forum is a good start for research.
#5
Posted 11 January 2007 - 06:32 PM
I can do you a good head for turboing. Have a look in the turbo section for info on the whole subject tho. A word of warning, A series engines are not the best for forced induction because of their poor reliability under the stresses forced induction puts on them, after all they were only designed for around 30bhp.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users