Jump to content


Photo
- - - - -

flasher unit


  • Please log in to reply
5 replies to this topic

#1 twinks22

twinks22

    Mini Mad

  • Members
  • PipPipPipPip
  • 185 posts
  • Local Club: SMOC/LSMOC

Posted 01 February 2007 - 03:19 PM

bit of help please my indicators and hazards not working.
have checked fuses all good, thinking it could well be the flasher unit but not sure of its location
is it the orange box under the shelf by drivers door.thanks

#2 Dom

Dom

    Moved Into The Mazda

  • TMF+ Member
  • PipPipPipPipPipPipPipPipPipPipPip
  • 10,685 posts
  • Location: Nürburgring

Posted 01 February 2007 - 03:36 PM

I'll move this to the Problems section. You will get helped there. :P

#3 mkw

mkw

    One Carb Or Two?

  • TMF+ Member
  • PipPipPipPipPipPipPip
  • 1,003 posts
  • Location: Sheffield

Posted 01 February 2007 - 03:38 PM

It's the silver block jobby on the bulkhead, passenger side.

#4 Gizzum

Gizzum

    Super Mini Mad

  • Members
  • PipPipPipPipPipPip
  • 554 posts
  • Local Club: None atm

Posted 01 February 2007 - 03:40 PM

Might want to do a search first as this has come up sooo many times. If you are talking about the big oprange one behind the speedo then that will be the dim/dip relay. The relay is by the wiper motor in the engine bay. Normally get filled up with all sorts of shi :P e! if you have any electrical knowledge, move it inside and it lasts a lot longer.

#5 Garagiste

Garagiste

    Speeding Along Now

  • Members
  • PipPipPipPipPip
  • 336 posts

Posted 01 February 2007 - 05:26 PM

A search would indeed turn up a load of threads on this.
The box on the bulhead is the hazard flasher unit, the one for indicators is up behind the clocks on the inside.
If neither are working I'd bet it's your hazard switch as they both run through it. Try a continuity test on it with a multimeter - if it's not working correctly it can be taken to bits and fixed, but do it indoors in a well lit room as there fiddly little springy bits inside!

#6 twinks22

twinks22

    Mini Mad

  • Members
  • PipPipPipPip
  • 185 posts
  • Local Club: SMOC/LSMOC

Posted 01 February 2007 - 05:54 PM

Might want to do a search first as this has come up sooo many times. If you are talking about the big oprange one behind the speedo then that will be the dim/dip relay. The relay is by the wiper motor in the engine bay. Normally get filled up with all sorts of shi :P e! if you have any electrical knowledge, move it inside and it lasts a lot longer.

thanks chaps there are 2 relays by the wiper motor in the bulkhead. ill do a search and hopefully can sort it from there.




1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users