Chloe's mini is going well so far, the only thing is that it pulls to the left, the trackings been looked at twice and that seems fine.
There is alittle play in the passengers side rear radius arm, there doesnt seem to be much play in the front wheel bearings or ball joints and nothing looks bent of out of place.
Anyone know what else i can look at?
MLC pulling to the left
Started by
paulbin
, Feb 02 2007 11:33 PM
3 replies to this topic
#1
Posted 02 February 2007 - 11:33 PM
#2
Posted 03 February 2007 - 01:36 AM
is the brake calliper binding?
#3
Posted 03 February 2007 - 03:41 AM
have you checked the tyre pressures? Could be something simple as a tyre with lower pressure on one side.
Could also be the subframe alignment. There is a method in Haynes to check the sbframes are running true to the body.
Daniel
Could also be the subframe alignment. There is a method in Haynes to check the sbframes are running true to the body.
Daniel
#4
Posted 03 February 2007 - 02:39 PM
tyre pressures are fine, and its running drums and there all ok aswell.
will check the bible
will check the bible
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users