10 replies to this topic

[Retro_10s]

Just a quick one. on the picture below I have incdicated (with little red dots) where I believe the two adjustable screws on the headlamps should be positioned when the lamps are secured to the car.

Am i right? I'm cutting my new 2piece front end to accept standard equipment and wanted to make sure that i cut the holes in the right places.

cheers, Mike.

Attached Files

•  mini_classic_cooper_s_2000_03_m.jpg   45.63K   6 downloads

[Jimmyarm]

IIRC on mine the one at the bottom is at the top on mine if that makes sense ?

[Retro_10s]

yeah makes sense.... but a picture in Haynes is telling me otherwise... but only on one side.. hmm so need to know if each side symetrical or not.

[Retro_10s]

please... cna anyone help... i want to get working on my car again but need this info

Edited by Retro_10s, 29 March 2007 - 04:35 PM.

[Jimmyarm]

give me 5 minutes and I'll pull be rings off !

[Retro_10s]

good lad.

[minipip]

mine are the bottom ones at the top and think they are the same side for the other side........

[Jimmyarm]

ok imagine 2 backwards L 's, or even easier on at the top and one at the left (when you are facing the front of the car) is how mine are set up Thats on both side by the way

That got me some odd looks in the carpark at work !

Edited by Jimmyarm, 29 March 2007 - 04:47 PM.

[Retro_10s]

like this? (purple circles.)

Attached Files

•  mini_classic_cooper_s_2000_03_m.jpg   45.87K   4 downloads

[Jimmyarm]

Yep, thats were the adjusting screws are.

Sort of makes sense as well as the lights are meant to point slightly more to the offside iirc

[Retro_10s]

Yep, thats were the adjusting screws are.

Sort of makes sense as well as the lights are meant to point slightly more to the offside iirc

yeah i thought they must have been something to do with offside etc. thankyou everyone, thank Jimmy