
5.5 inch revolutions
Started by
riffraff
, Apr 09 2007 08:23 PM
2 replies to this topic
#1
Posted 09 April 2007 - 08:23 PM
hi guys. just bought some 5.5 inch revos for my 95 mayfair and was wonderin whether i need to do any body mods to get em on. and what size rubber would be best. cheers
#2
Posted 09 April 2007 - 08:56 PM
You will probrably need to modify the front of the wheelarches slightly and depending on how far they stick out you may need new wheelarch extensions. Assuming they are 5.5x12 the best size tyres will be either 165x60x12 or 165x55x12, the latter being the same width but a slightly lower profile. 145x70 are probrably going to be too narrow to fit onto a 5.5 inch wide wheel. Hope this helps. Also, welcome to TMF.

Edited by Austin, 09 April 2007 - 08:58 PM.
#3
Posted 09 April 2007 - 09:05 PM
cheers matey. im havin a whole new front end on in the next few weeks and i bought some stainless arches to go on with them. the wheels were a last minute spur of the moment job yesterday (our lass wanted new table n chairs so i had to hav what i wanted too lol!!) all bein well i should get away without too much trouble then. thanks again, robbieYou will probrably need to modify the front of the wheelarches slightly and depending on how far they stick out you may need new wheelarch extensions. Assuming they are 5.5x12 the best size tyres will be either 165x60x12 or 165x55x12, the latter being the same width but a slightly lower profile. 145x70 are probrably going to be too narrow to fit onto a 5.5 inch wide wheel. Hope this helps. Also, welcome to TMF. :thumbsup:
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users