
Whats wrong with my Mini!!!
#1
Posted 10 April 2007 - 07:14 AM
Thanks Heaps
#2
Posted 10 April 2007 - 07:24 AM
Ok where do I start, My Mini is 1330 and It has a single carb with k&N on it. My car also has a bonnet scope which might be why the problem has occured. Everytime I take the car out in a cold morning it runs like C**p. It stutters really bad untill you drive around for a good 10mins then it stops. But the other day when I was driving home from work it didnt get better at all it got worse, to the point where it wouldnt even move it was just miss firing. It was also raining during the day so could it be water that got into the carb? I got towed to the garage by a mate and took out all the sparks, they were like completly black. After a good clean the car would run good enough to get home but it is still running really bad with constant missing (whats the problem?) The coil on the car mite even be the standard 850 coil, could this also be a factor? Please if anyone could help me that would be great!!!
Thanks Heaps
Here is a pic of the engine if it helps
Attached Files
#3
Posted 10 April 2007 - 07:30 AM
If you suspect that there is a lot of water getting under the bonnet into the carb area, I'd also do something about sealing that.
#4
Posted 10 April 2007 - 08:01 AM
it has condensation in it,spray the inside with WD or
similar moisture dispersal spray, change the disi cap if it is
old just incase it is cracked. also spray the leads they may be
stray arcing causing a miss fire, i'd change the plugs and condeser
aswell, best to change things in turn then you will know what
the problem was.
Edited by camp freddy, 10 April 2007 - 08:06 AM.
#5
Posted 10 April 2007 - 08:08 AM
carb icing.
Edited by camp freddy, 10 April 2007 - 08:08 AM.
#6
Posted 10 April 2007 - 09:12 AM
Edited by Retro_10s, 10 April 2007 - 09:12 AM.
#7
Posted 10 April 2007 - 10:32 AM
#8
Posted 10 April 2007 - 10:47 AM
#9
Posted 11 April 2007 - 10:19 AM
#10
Posted 11 April 2007 - 12:41 PM
Turned out to just be points and condensor.
#11
Posted 12 April 2007 - 10:57 AM
#12
Posted 12 April 2007 - 06:09 PM
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users