No replies to this topic

[Big_Adam]

Evening,

Was wondering if I made this up (from the rubble that is the depths of my mind) or it someone had done it. Basicaly the far side of the block (from the pump) cylinders water flow isn't as good as it could be. So a bypass can be done by removing the end core plug and adding a hose and fitting to the cylinder head (machined with fitting for pipe) giving better flow.

So it's cylinder head with a big hole in it. Pipe. Block. Does this get done or have I made it up. I was sure I'd seen it in a vizard book but for the life of me I could never find it again.

Ta and sorry for the random ramblings.