Hey guys, im new here.
I have just bought a 06' hayabusa, and I intend to use the motor in the back of my clubman.
just a few questions, I have searched, but I have not found the answers I was after, so hopefully you guys can help me out now, and through out the build.
first question: (I have used a pic from this forum, im sorry if this is a problem, I have done so so its easier to explain - thanks)
1 what car does the rear brake assembly come from? or what cars rear brakes could I use for this?
2 what car, if any does the rear shafts come from? or what car could you use them from?
3 and last, this thing that the shafts spin in, how do I get these?
these are the only few things slowing me down atm, I will be using chain drive, unless someone tells me a better way, I was going to use a datsun 1600 rear set up, as having the same track as a mini, but It is quite heavy.
so any help would be great, ill keep you all posted on my project.
Regards, josh
Few questions, hope u guys can help.
Started by
MiniMafia
, May 21 2007 04:14 AM
4 replies to this topic
#1
Posted 21 May 2007 - 04:14 AM
#2
Posted 21 May 2007 - 06:13 AM
1 what car does the rear brake assembly come from? or what cars rear brakes could I use for this? Z CARS
2 what car, if any does the rear shafts come from? or what car could you use them from? Z CARS
3 and last, this thing that the shafts spin in, how do I get these? Z CARS
HERE IS A LINK FOR Z CARS
Hope this helps
2 what car, if any does the rear shafts come from? or what car could you use them from? Z CARS
3 and last, this thing that the shafts spin in, how do I get these? Z CARS
HERE IS A LINK FOR Z CARS
Hope this helps
#3
Posted 21 May 2007 - 07:30 AM
1 what car does the rear brake assembly come from? or what cars rear brakes could I use for this? Z CARS
2 what car, if any does the rear shafts come from? or what car could you use them from? Z CARS
3 and last, this thing that the shafts spin in, how do I get these? Z CARS
HERE IS A LINK FOR Z CARS
Hope this helps
Im in tasmania, shipping would be a problem. i was hoping these could be bought either off the shelf or from a wreckers down here........
#4
Posted 21 May 2007 - 10:07 AM
Sorry I did not realise you were from Tasmania. Welcome.
Most of the parts are bespoke design and manufactured in house at Z cars.
If you search on the none mini engined section you may find other bike engined conversions.
What sort of cars do you have in Tasmania?
Most of the parts are bespoke design and manufactured in house at Z cars.
If you search on the none mini engined section you may find other bike engined conversions.
What sort of cars do you have in Tasmania?
#5
Posted 21 May 2007 - 10:31 AM
hey!
we have everything australia has! holdens, fords, nissans, hondas, toyotas...
I dont care how I get the thing in there, i just want it in there, and RWD!!!
the clubman is very very light, with fiber glass boot, front, light doors and lightend shell, perspex windows and lightend front subframe. should go well
I have searched, but I have a very, very slow dial up like 32 k internet. any good links?
sorry about all the questions, but im just really keen to get going
we have everything australia has! holdens, fords, nissans, hondas, toyotas...
I dont care how I get the thing in there, i just want it in there, and RWD!!!
the clubman is very very light, with fiber glass boot, front, light doors and lightend shell, perspex windows and lightend front subframe. should go well
I have searched, but I have a very, very slow dial up like 32 k internet. any good links?
sorry about all the questions, but im just really keen to get going
Edited by MiniMafia, 21 May 2007 - 10:34 AM.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users