My rear tyres seem to be wearing on the out side of the tyre really quick, and they are toeing in i believe, but how on earth do i sort out the back wheels??
rear tyres problem
Started by
day101
, May 21 2007 05:00 PM
8 replies to this topic
#1
Posted 21 May 2007 - 05:00 PM
#2
Posted 21 May 2007 - 05:13 PM
Take it down to Hereford Tyres, they have a 4 wheel alinment gear down there, see if they can help ya!
#3
Posted 21 May 2007 - 05:17 PM
Where abouts is that mate in hereford?
#4
Posted 21 May 2007 - 05:21 PM
By the Hospital, erm... go down past the Court, to the copshop, turn left down there, then its the first right, and their sat opposite ATS...
#5
Posted 21 May 2007 - 05:28 PM
standard mini's run positive camber on the back
some negative camber and tracking brackets might help
some negative camber and tracking brackets might help
#6
Posted 21 May 2007 - 06:07 PM
As std mini's dont have adjustable suspension at the rear, putting a mini on a four wheel alingment device is only going to tell you how far it's out... not that you'll be able to do anything about it..
Also if it's WAY out, It maybe your raduis arms are knackered or the subframes bent...
Also if it's WAY out, It maybe your raduis arms are knackered or the subframes bent...
#7
Posted 21 May 2007 - 06:23 PM
have you fitted different wheels???
#8
Posted 21 May 2007 - 07:06 PM
no had the same wheels all along fitted the subframe not so far back but only noticed the problem last two days
#9
Posted 21 May 2007 - 08:29 PM
Wheel bearings on their way out?
2 user(s) are reading this topic
0 members, 2 guests, 0 anonymous users











