13 replies to this topic

[ministudio2]

can i use the standerd subby tower mounts and floor mounts with the front cut of and brace bars added is it safe
if not what do i need to get

Edited by ministudio2, 27 May 2007 - 09:22 PM.

[bennett]

can i use the standerd subby tower mounts and floor mounts with the front cut of and brace bars added is it safe
if not what do i need to get

hello mate not sure about towewr bolts,(i used solid alloy ones). but you should change your standard floor mount to solid ones

hope this helps aaron

[ministudio2]

solid as in metal???

[Retro_10s]

Yes, solid metal.

[ministudio2]

what and the tower mounts can these be made diy ??

[bennett]

what and the tower mounts can these be made diy ??

not sure about DIY you can buy them for around 25 pounds

[ministudio2]

ok cool wots the best place to get them
cheers

[ministudio2]

ok found some solid rear subby mounts

do i need solid engine mounts also ?????????

[ministudio2]

also i cant find solid tower mounts

[Tomf]

I dont think you need solid engine mounts, just subframe mounts.

[ministudio2]

hi ok i can find lower rear solid mounts but not tower mounts where do i get these

[stef]

rear subframe:

http://www.minispare....aspx?pid=34759

Tower:

http://www.minispare....aspx?pid=37302


i thought it was a requirement to have these, otherwise there is great danger of you losing your front subframe lol?

meh, you'd be wise to get both anyway, its not good to have your subframe moving really, its just the expense of extra noise.

[ministudio2]

cool nice one cheers

[Spannermonkey6464]

can someone poss put a link up for poly tower mounts please as i cant seem to find them doh! and also if possible the size of the top mount bold head too


Thanks

Edited by Pitcrew, 02 June 2007 - 03:53 PM.