2 replies to this topic

[Snowfruit]

http://www.minispare...x?pid=37818Over the last few days I have (finally) been putting a lot of parts back on the car including my new tail light clusters.

Before I started if I switched the lights on that dash lighting would light up.
after I wired all the tail lights up the dash light no longer shows and none of the tail lights work. So my first thought was blown fuse. But as it turns out at some stage some one has removed the fuse box from my car. I've looked everywhere for it but its not to be found. Instead, where the box should have been, there are just about four or five spliced wires (I'm assuming these used to go to the box and have now been connected to bypass that.) Why I haven't a clue.

But now my problem is, how do I diagnose why my lights don't work?

[THE ANORAK]

well i'm no electrics expert but the fuse box is there for a reason, i think you need to get one fitted as soon as.

[il-barba]

its useless continue wiring the car without a fuse box since if a short occurs instead of the blown fuse youd have burning wires