any idea why, cant find any loose wires behind dash or in the bay.
any help aprechiated:D
Temp gauge not working!!
Started by
Musto
, Jul 01 2007 04:41 PM
4 replies to this topic
#1
Posted 01 July 2007 - 04:41 PM
#2
Posted 01 July 2007 - 04:43 PM
have you tried replacing the temp sensor
#3
Posted 01 July 2007 - 04:59 PM
Short the temp gauge wire to the block. If the gauge flys up then your problem lays within the sensor.
#4
Posted 01 July 2007 - 06:15 PM
Just to add to Big_Adams method... don't forget to ground the sending unit wire while the ignition switch is ON. You won't learn anything if the ignition is turned off.
#5
Posted 07 July 2007 - 03:40 PM
lol ok i shud ov told you a bit mre, since a SPI to carb convertion , and after that a new engine, im left with 1 brown wire floating around the dizzy area ish. the loom isnt xactly standerd, as ive run a few of my own wires and what not.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users