bonnet
Started by
The_Mini_Bug
, Jan 26 2004 12:29 PM
8 replies to this topic
#1
The_Mini_Bug
-
- Members
-
- 1,702 posts
1 Gold Star
Posted 26 January 2004 - 12:29 PM
which is the best way to fit a fiber glass bonnet plz
#2
marksmini
-
- Admin
-
- 49,441 posts
Mark - Founder of TMF since 2003 - Onwards
- Name: Mark
- Location: Nottingham
- Local Club: TMF
Posted 26 January 2004 - 07:00 PM
remove the old one first, i find personaly very helpfull start,
lmao
dont have a clue...
lmao
dont have a clue...
#3
The_Mini_Bug
-
- Members
-
- 1,702 posts
1 Gold Star
Posted 27 January 2004 - 12:48 AM
well i thought you super glued it on top lmfao
#4
Bluemini
-
- Members
-
- 4,436 posts
Mini Doctor
- Location: Canada
- Local Club: Blacktop Bombers
Posted 27 January 2004 - 05:48 PM
Best way to do it is to fit it with bonnet pins, one at each corner...
#5
The_Mini_Bug
-
- Members
-
- 1,702 posts
1 Gold Star
Posted 27 January 2004 - 06:10 PM
sorted that the way i was thinkin
#6
Bluemini
-
- Members
-
- 4,436 posts
Mini Doctor
- Location: Canada
- Local Club: Blacktop Bombers
Posted 27 January 2004 - 06:15 PM
what you need is a couple of triangular bits of metal in the corners for the pins to go in...
Attached Files
-
RICH_ENGINE_02a.JPG 46.49K
16 downloads
#7
The_Mini_Bug
-
- Members
-
- 1,702 posts
1 Gold Star
Posted 27 January 2004 - 09:36 PM
weldin then im no good at the im good with a drill or spanner tho
#8
Bluemini
-
- Members
-
- 4,436 posts
Mini Doctor
- Location: Canada
- Local Club: Blacktop Bombers
Posted 27 January 2004 - 10:07 PM
Jus put a couple of self tapping screws in on each side...
#9
The_Mini_Bug
-
- Members
-
- 1,702 posts
1 Gold Star
Posted 27 January 2004 - 10:41 PM
i know ill pop rivet em on
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
