I have a Weber Dcoe40 and i am going to be selling it after a little clean up and when i have a couple of new bolts for it. I am just wondering on average how much these things sell for as i have no idea! I have looked on ebay but that doesn't really give a very good indication.
Thanks Alot
Tom.
Weber
Started by
Tom998
, Sep 02 2007 11:04 AM
6 replies to this topic
#1
Posted 02 September 2007 - 11:04 AM
#2
Posted 02 September 2007 - 02:09 PM
have also found out it was made in Italy which i have been told is the better quality older ones!
Tom.
Tom.
#3
Posted 02 September 2007 - 05:49 PM
depends,
just the carb or manifold, fitler, linkage etc?
just the carb or manifold, fitler, linkage etc?
#4
Posted 02 September 2007 - 07:53 PM
Depends!
What chokes r in it?
does it have ram pipes?
What jets?
Did it come off a running car?
What chokes r in it?
does it have ram pipes?
What jets?
Did it come off a running car?
#5
Posted 02 September 2007 - 09:47 PM
it is just the carb, all i know is it came off a mini and i am not sure what chokes/jets are in it. It did come off a running mini i believe!
Tom.
Tom.
#6
Posted 02 September 2007 - 09:49 PM
look down the holes, will be a number punched around the outside of each choke.
#7
Posted 05 September 2007 - 08:52 PM
its not just chokes although they should be arround 32, theres about 20-25 parts to change in a weber, better knowing what EXACT car spec the carb came of....
the price really depends, i picked up a weber on manifold + filter for 80 needed cleaning n no spec known,
i got a weber 40 for 45 inc p+p
and cleaned got them working added manifold and sold them for 150 each!
al this wa on ebay, its a good price guide on average and no1 really pays more than this (as a guide)
the price really depends, i picked up a weber on manifold + filter for 80 needed cleaning n no spec known,
i got a weber 40 for 45 inc p+p
and cleaned got them working added manifold and sold them for 150 each!
al this wa on ebay, its a good price guide on average and no1 really pays more than this (as a guide)
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users