4 replies to this topic

[robson]

Afternoon. Just a quick question:

What size are the copper washers (inner and outer diameter) for goodrich braided hoses with banjo type connectors, for the brakes?

I need to replace mine, in particular the ones from the PDWA to master cylinder, however i wont be able to measure them currently on my car, before i can get to the shop. They will all be of the same size used on a mini

As used on this product, including many others:

http://minispares.co....aspx?pid=34303

I dont think they are as big as these:

http://minispares.co....aspx?pid=35332

Thanks

Edited by robson, 07 September 2007 - 12:00 PM.

[Ethel]

Could be 2 sizes on your master cylinder depending on type. Same size as a brake union 3/8" or 10mm ID or possibly 12mm on one M/Cylinder line.

[black jack1275]

i got a mixed pack of copper washers from halfords, they fitted the same kit you have

[robson]

Its a single, so either 3/8 or 10 ID. they are so close anyway ill just go for the 10 - a difference of 0.6mm is probably not going to matter here Thanks

[busa1999]

if you still have the old washers heat them up till red hot then dunk them in cold water this will soften the metal so they will seal again