12 replies to this topic

[Dog]

Hey all.

While changing my final drive, I was wondering what size is the pinion nut?
Also does anyone know if there are deep sockets that'll fit the nut?


aaaaaaaaannnnnnnnnnnnddddddddd, is it a left or right hand thread?

[Big_Adam]

It's either 1 and 5/16 or one and one half.

I think.

[Turbo Nick]

ball joint socket dog

normal thread iirc

Edited by bud666, 20 September 2007 - 07:17 PM.

[Dog]

Darn - trust it to be one I haven't got yet
What size is a ball joint socket? Might go over Hellfruads and get socket...

[ginigwunkle]

its 1 5/16ths

ther not cheap at halfords, 11quid!

names up as ball joint socket and is nice and deep!

[Dog]

£11 sounds fair to be honest - spesh from Hellfruads.

Cheers fellas, I can finish my box off now

[Turbo Nick]

its 1" 1/2 not 1" 5/16's for the ball joint socket.

Edited by bud666, 20 September 2007 - 07:43 PM.

[ginigwunkle]

aaaaaaaah,

1.5/16ths is 38mm which is the flywheel.........hehehehe

[Dog]

aaaaaaaah,

1.5/16ths is 38mm which is the flywheel.........hehehehe

and tower bolt...

[Turbo Nick]

aaaaaaaah,

1.5/16ths is 38mm which is the flywheel.........hehehehe

i give up

[minivanman]

aaaaaaaah,

1.5/16ths is 38mm which is the flywheel.........hehehehe

i give up

Its 3/4 whitworth as well, if you're feeling particularly rough

[Big_Adam]

aaaaaaaah,

1.5/16ths is 38mm which is the flywheel.........hehehehe

and tower bolt...

Find yourself a good local general car part/mechanic place. My one (GT Motor) loans me tools, hell one guy was going to lend me his car. I thought that was cool.

Flywheel bolts inch and a half.

Edited by Big_Adam, 20 September 2007 - 11:10 PM.

[Guess-Works.com]

and don't take it off with an impact air gun, or you'll stress the gears...