ok this is on my camper but a ignition circuit is a ignition circuit
fitted a new coil and ignition switch to my bus after breaking down and it runs
turned off engine and turned ignition switch on to test voltages at coil and notest the black + wire to the coil is very very hot (this runs from the ignition switch to the coil)
now using my electrical mind to get hot it needs to draw lots of current
to draw lots of current you need a big load
the only load is the coil
so wheres the extra load ?
high resistance in the wiring ?
Ignition Circuit
Started by
Bungle
, Sep 22 2007 05:19 PM
No replies to this topic
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users