12 replies to this topic

[hjorthen]

Hello mini friends


I need to replace some parts on my Mini Clubman from 1974, and would like to know if these parts will fit :

14A6902 HINGE A PANEL EXTERNAL HINGE L/H
HMP441016 BOOT FLOOR CONTAINING BATTERY BOX
14A9534 OUTER SILL PANEL O/S Mk3 on
14A9535 OUTER SILL PANEL L/H MK3 on
14A9558 WHEEL ARCH R/H REAR GENUINE
HMP441014 REAR QTR PANEL LOWER R/H
HMP441015 REAR QTR PANEL LOWER L/H
GRD172 RADIATOR UNIT GENUINE TYPE WITH SENSOR HOLE IN BOTTOM
FAM6292 SUBFRAME REAR DRY GENUINE(use KHU10011/2 hangers for 90on)

I know that the Clubman is a little different from an ordinary Mini. But as I has understood it, the only difference is the length and the shape of the front... ?

Best Regards
Simon

Edited by hjorthen, 14 November 2007 - 08:24 AM.

[minislapper]

I'm sure the part numbers won't mean much to most people.

If you list the items, not the numbers, it would be more helpful.

[hjorthen]

Okay. I added the names of the items, all found on Minispares ... Hope it's better now

[ian]

i think the first panel you have listed is wrong, does your car have external or internal door hinges?

hang on i'll find the one you need

if its internal hinge you need ala5661.

i think the rest of its right though

Edited by ian, 14 November 2007 - 09:09 AM.

[Bungle]

its only the wings, front panel, bonnet and inner wings that are different on a clubman (i think)

[hjorthen]

i think the first panel you have listed is wrong, does your car have external or internal door hinges?

hang on i'll find the one you need

if its internal hinge you need ala5661.

i think the rest of its right though

You're right... My car has internal door hinges... So I need the part you said ...

[Matrix]

being the part No man I can confirm the are correct apart from the A panel number which have sorted now with ALA5661

[hjorthen]

Okay. thanks for the fast response

I just have a additional question: Will these parts also fit :

HMP441004 FLOOR PANEL ROD CHANGE R/H FRONT AND REAR
HMP441005 FLOOR PANEL ROD CHANGE L/H FRONT AND REAR

?

[Ethel]

Yes, if your car has the lift for reverse gear lever- I think all clubbies do. It is a saloon?

[hjorthen]

Yes I have to lift the lever to put it into reverse ... And yes it is a saloon.

[GraemeC]

I think early clubmans, certainly GTs, were remote change not rod.

However for a '74 I think the panels you quote will be correct - just check that your gear lever is connected to the engine by two rods.

[hjorthen]

It is connected with two rods ... One that is stationary and one that moves when I move the gear lever ...

[GraemeC]

The you have identified the correct floor panels!